WIRELESS SYNCHRONIZATION SYSTEM
wireless translation system
LAN-S1T/R
Launch:
1. The wireless transmitter can be configured with 16CH translation language signal channels for interpreters to switch and output the translation language on the spot.
2. It can switch between translation language (source language) or other translation language channels.
3. Oscillation mode: quartz oscillation.
4. Harmonic ratio (S/N): 80 dB or above.
5. Image interference ratio: < -50 dB.
6. RF stability: < 0.005%.
7. UHF PLL transmission frequency.
8. Audio input method: φ6.3mm input with volume adjustment function.
9. Distortion ratio: 0.5% (1 kHz).
10. Frequency response: 50 Hz to 18 kHz ±3 dB.
11. Transmission distance: about 70m.
Reception:
1. No wiring is required and it can be used as needed according to the number of participants.
2. Number of receiving channels: can listen to 16CH.
3. Oscillation mode: quartz oscillation.
4. Frequency range: 680-960 MHz.
5. UHF PLL frequency synthesis phase lock system.
6. Equipped with one set of 3.5mm headphone output jacks.
7. Image interference ratio: < -50 dB.
8. Power consumption: 70 mA ± 10 mA.
9. Sensitivity: -90 dBm ±2 dBm.
10. Frequency response: 100 Hz to 15 kHz (±3 dB).
11. Operating distance: about 70m.
12. Operating time: can be used for 8 to 9 hours.
13. Uses 2 standard No. 4 batteries.
